APPLIED PLASTICS CO., INC.

APC gets right to the point

Veterinarians who draw blood from large herds of horses required a needle that could penetrate the tough hide, would insert smoothly to reduce operator fatigue, could be repeatedly sterilized, and reused many times.

APC used TEFLON®-PTFE to obtain the perfect coating for the job. The natural lubricity of TEFLON® enables the veterinarians to obtain blood samples with greater ease and less muscle strain. The needles can be sterilized simply and quickly.

Tool handles undergoing electrostatic
coating process prior to curing. The
charged powder is evenly applied to the
grounded object.

APC finishes first

Marathoner Bob Hall needed a protective coating for his racing wheelchair. Weather extremes, road dirt, and general wear and tear were taking their toll on the super-light steel frame Bob manufactures for use in grueling athletic events. Traditional paints failed to provide a uniform covering, nor could they withstand the constant abuse of daily use.

APC determined that a powdered epoxy coating would provide an abrasion - and impact-resistant surface. Would protect the metal from rust and weather extremes, would provide a more uniform coating, and would not drip or sag at welds joints. Cosmetically, the appropriate coating for the job was available in a variety of bright attractive colors.

Cylinders being cured in an oven.
Depending upon the object and the
coating being used, curing temperatures
range from ambient to 800°F
for varying durations.

P.O. Box 128, 25-T Endicott St., Norwood, MA 02062
TEL: 781-762-1881  FAX: 781-769-3349

[A solution to every problem][APC is right on target][APC lowers rejection rate Just-In-Time] [APC gets right to the point] [A coating for every reason]
[Contact Us] [APC coats fine wire with Teflon® for release, Insulation] [Mandrels in stock]

APC Home